Supported Hardware: Multi Panel, Radio Panel, Switch Panel, Honeycomb Alpha Yoke
IF YOU HAVE ANY PROBLEMS, YOU CANNOT USE MY PROFILE, ETC..., DO NOT CONTACT OFFICIAL SPAD.NEXT SUPPORT. CONTACT ME VIA FLIGHTSIM.TO DMS OR DISCORD PΩPA15_CZ#7435 ...
Please do not copy / reupload my work without my permission.
Please use latest spad.next version for my profile to make things work properly.
This profile requires LVAR Bridge and Sim Connection.
Installation: just put the extracted file "Airbus A310-300 v1.1 by popa15_cz.xml" into your spad.next profile folder (default location: C:\your_windows_username\Documents\SPAD.neXt\profiles)
If you want donate me you can HERE :)
Every donation is Welcome.
BEFORE YOU CONTACT ME THAT PANELS ARE DISABLED / NOT WORKING, ENSURE YOUR AIRCRAFT DOES HAVE TURNED OFF GENERATORS (FOR MORE INFO READ DESCRIPTION)
Changelog:
v1.0:
- release
v1.1:
- added Profile button to REV button on Multi panel
v1.2.0:
- added honeycomb alpha yoke support
- added virtual power
- fixed some bugs
Description (what button is what...):
VIRTUAL POWER:
- You need to have turned on atleast batteries to virtual power Radio panel
- You need to have turned on atleast external power / engine 1 or 2 generator / apu generator to virtual power Switch panel
- You need to have turned on atleast external power / engine 1 or 2 generator / apu generator to virtual power Multi panel
SWITCH PANEL:
BAT. : Turns on / off all 3 batteries
ALT. :. Automatically starts up APU
AVIONICS MASTER : Turns all three adirs to OFF / NAV
FUEL PUMP : Turns on / off all fuel pumps
DE-ICE : Turns on / off Engine & Wing de-ice
PITOT HEAT : TURNS on / off window heat
COWL : Turns on / off parking brake
PANEL : Turns on / off Wing lights
BEACON : Turns on / off Beacon lights
NAV : Turns on / off Navigation lights
STROBE : Turns on / off Strobe lights
TAXI : Turns on / off Taxi & Take off & RWY Turnoff lights
LANDING : Retracts / turns on Landing lights
LANDING GEAR HANDLE : Gear up / Gear down
LANDING GEAR LIGHT INDICATORS: Off: Retracted LDG GEAR, Red: Retracting / Extending LDG GEAR or FAILURE; Green: Extended; Yellow: Extended, but airspeed is greater than 200kts
STARTER: EFIS ND Mode switching
MULTI PANEL:
Autopilot button: toggles on / off autopilot 1
HDG button: toggles HDG SEL button
NAV button: toggles NAV button
IAS button: toggles A/THR button
ALT button (short press): toggles on ALT HOLD button
ALT button (long press): toggles on / off LVL CHANGE button
VS button: engange Vertical speed (press twice to work properly)
APR button: toggles on / off LAND / APPROACH MODE button
REV button: toggles on / off PROFILE button
AUTO THROTTLE lever: does nothing
Pitch trim: Vertical trimming
Flaps: DN: set Knob session to 100 / 100 / 1 / 1 / 1; UP: set Knob session to 1000 / 500 / 10 / 10 / 10
ALT tab:
- Displays selected ALT and VS
- Knob changes altitude by 100ft / 1000ft; as selected by flaps lever
VS tab:
- Displays selected ALT and VS
- Knob changes Vertical speed by 100fpm / 500fpm; as selected by flaps lever
IAS tab:
- Displays selected Air speed
- Knob changes Air speed by 1kts / 10kts; as selected by flaps lever
HDG tab:
- Displays selected Heading
- Knob changes Heading by 1° / 10°; as selected by flaps lever
CRS tab:
If you have selected on EFIS panel on VOR / NAV / ILS switch: VOR
- Displays selected VOR 1 course
- Knob changes VOR 1 course by 1° / 10°; as selected by flaps lever
If you have selected on EFIS panel on VOR / NAV / ILS switch: ILS / NAV
- Displays selected ILS course
- Knob changes ILS course by 1° / 10°; as selected by flaps lever
RADIO PANEL:
COM 1 / 2 tab:
Left display: Displays active Com 1 / 2 frequency
Right display: Displays standby Com 1 / 2 frequency
Inner knob: Changes COM 1 / 2 frequency by: 0.005 / 0.025 Mhz; as selected by flaps lever
Outer knob: Changes COM 1 / 2 frequency by: 1 / 1 Mhz; as selected by flaps lever
NAV 1 tab:
Left display: -
Right display: Displays NAV 1 frequency
Inner knob: Changes NAV 1 frequency by: 0.05 Mhz
Outer knob: Changes NAV 1 frequency by: 1 Mhz
NAV 2 tab:
Left display: -
Right display: Displays ILS frequency
Inner knob: Changes ILS frequency by: 0.05 Mhz
Outer knob: Changes ILS frequency by: 1 Mhz
ADF tab:
not working, will be working in next updates :)
DME tab:
Left display: shows distance between aircraft and Vor 1
Right display: shows distance between aircraft and ILS
XPDR tab:
Displays Transponder code
Inner knob: changes last two digits
Outer knob: changes first two digits
HONEYCOMB ALPHA YOKE:
Starter: OFF: crank; R: cont relight; L: off; BOTH: nothing; START: start A
Battery: Engine fuel valve 1
Alternator: Engine fuel valve 2
Avionics master 1: nothing
Avionics master 2: nothing
BCN: Engine Generator 1
LAND: Engine Generator 2
TAXI: nothing
NAV: nothing
STROBE: APU Generator
That's all, Enjoy and fly safe!
v1.0, made by popa15_cz, do not copy or reupload without my permission.
Thanks,
Tom
3 months ago
3 months ago
POPA15_CZ
kar541956
Love it! Makes so much better - thank you very much!
But I have a question: when I use the silver wheel on the Multipanel to select ALT, VS, IAS, etc., the numbers keep jumping around erratically. Does anybody know why?
Also: when on final approach you switch off the AP by pressing AP on the Multipanel, the alarm keeps going on. You have to manually press the red button on the virtual yoke, using the mouse. Maybe you can solve that too..?😊
Keep up the great work!
1 years ago
have you uninstalled logitech drivers? uninstall it... if you have more problems let's solve it in dms not there in comments
1 years ago
POPA15_CZ
SWISSBEACH87
Thx for this, works great with the Saitek radio panel
1 years ago
rasp00tin
I don't have or need the Logitech Switch Panel, how do I turn this off with this profile
1 years ago
what do you mean?
1 years ago
POPA15_CZ
bad_turbulence
Oh man, thanks for that! I will test it rightaway after work, was waiting for this for a loong time.
1 years ago
CzarnyPL
So happy I found this. Works great. The only thing is that I have to turn on the virtual power in SPAD for the Multipanel to start. Anyway to fix that ?
1 years ago
i'm currently aware of this "issue", you need to turn on battery or i don't remember exactly. wait for new update fixing this and adding more features.
1 years ago
POPA15_CZ
Hiortintexas
Great profile, however, the flap lever for the multipanel is ot working. Could you also add a button to use the V/L, so we can capture the localizer? Thank you~
1 years ago
thanks :), what do you mean it's not working? did you use it correctly as explained in my description? flap lever changes knob 10x session, that does that, you will change multi panel ALT, VS, IAS, HDG, CRS and Radio panel COM 1 and COM 2 values faster (if you set it to up). everything explained in description so read it. the reason why i did this, because flap lever isn't really great, because you can't see, if you have flaps up / down. i recommend controlling flaps by axis, like saitek throttle quadrant...
1 years ago
POPA15_CZ
Neonkitsune
Great job man. I managed to complete a Multiswitch version for me a few days ago, but your Multipanel version is awesome.
1 years ago
Ev1lT1ck
Thanks man,i was awaiting for this.
Works great,is that a possibility you can add the REV button to Profile?
1 years ago
thank you :), a310 as i know doesn't have reverse mode, or does?
1 years ago
POPA15_CZ
Azorian77