Behringer XTouch mini template for Fenix A320
and AAO
Requirements
Lorby-SI Axis and ohs
Fenix A320
Behringer X-Touch mini
Printable overlay is included in the zip. Works well when printed and laminated.
First time install: (this needs to be done only once, next time AAO will load profile
automatically):
1. Extract the zip
2. Open AAO and make sure Hardware -> MIDI Devices enabled is checked
3. Make sure AAO is in Offline mode. Go to Scripting -> Import scripts -> Choose Fenix_A320_scripts.xml file from
extracted zip -> Select all script categories -> Click import -> Wait until finished, might take a while.
4. Start MSFS and load Fenix A320 to your favorite airport
5. Go to Templates -> Import template -> Choose Fenix_A320_Xtouch_v1.0.tmpl file
from extracted zip -> Click import. If you have assignments already present, choose
Merge.
6. Go to Templates -> Apply a template to this aircraft -> Choose
Fenix_A320_Xtouch_v1.0 and click Apply
Tips
For rotaries Baro and COM works in both layers. A layer functions are above and B layer below
for other rotaries (for example NAV MODE is working in A layer and PFD brightness in B layer).
Below rotaries S: SEL means Short press of the rotary is Selected mode, L: MAN means Long
press of the rotary is Managed mode.
For buttons, text above button is Layer A and text below button is Layer B.
For example first button on top row: Layer A = FD, Layer B = ADIRS 1 knob.
Button below that:
Layer A = Taxi lights switch, Layer B = APU Master
Light buttons:
Taxi lights: Turns on/off Nose light and RWY Turn lights
Strobes: Auto → On → Off → Auto
LDG Lights: Short click: Turns LDG lights ON and OFF, Long click: Retracts LDG lights
Long pressing Cabin call button is T/O Config button, not mentioned in overlay.
Most of the stuff needed before aircraft is moving are in Layer B, and after all preparations are
done and you are ready to taxi only Layer A is needed.
All button LEDs are working correctly. (BAT1, BAT2, Crew supply is lighted even when they are off, I'll try to fix in next release)
Contact
Discord: bLindye#5236
MSFS forums: bLindyee
Avsim: bLindye
Thanks
daan_vb
nuke74
henksu
tuokki
teropa
Very impressive. Seeing this template encouraged me to try the x-touch and it's been phenomenal. The only behavior I have not been able to sort out is the rotaries not turning one direction. They tend to be jumpy. When turning the ALT knob one way, it will jump in both directions. I'm thinking a config problem on my part.
Asking here in the event someone can correct me and it can help anyone else that sees the same thing! 😊
1 years ago
You can try opening each assignment in AAO and change Skip value from 0 to 3, that might help. So double click each rotary assignment and with mouse wheel change Skip 0 -> 3.
And make sure you are using default layer configurations, so if you have changed them with Xtouch editor in the past, load and dump default layers.
1 years ago
bLindye
Nashifex
Hey. Thank you for that profile which is very very usefull. Just one little thing, I noticed that the rotary button for barometric pressure change the QNH "two by two" (example : clockwise : 1013 => 1015 => 1017...). It's the same with in/HG and HPA. Is there a way to modify this myself ? Thank you very much again.
EDIT : Disregard my question. I understood what was happening. It's because my EFIS BARO CTL option in the EFB was in "linked" mode. I switched it to "independent" and the function works perfectly. Thank you again for your work.
1 years ago
wattie60
Hello, great job but i don't get all functions work. The rotaries works correctly , but another functions like ap1, ap2, apu start, FD, LS doen't work. Could somebody help me please?.
1 years ago
Make sure you have default layers loaded with XTouch editor and scripts imported to AAO.
1 years ago
bLindye
Jaco
any chance to use this template with spad.next? Thanks 😊
1 years ago
No. Only with AAO
1 years ago
bLindye
flotograf
Not working with the latest fenix update
2 years ago
i found that only com1 is not working
2 years ago
rostyk
DCH174
Wonderful. It was just waiting for. Great job
2 years ago
iona_kj
Hey there, thanks so much for making this, but if it's the case that button LED's are supposed to stay on for things that are active they are not for me, They only stay on momentarily when the button is being depressed and then off again on release.
Do I need to do something to make that work?
2 years ago
Hey,
LEDs should stay on so something is wrong. Can you send me message on discord so we could troubleshoot what is going on
2 years ago
bLindye
WhiteHawk77
Great job! Works perfect!
2 years ago
wizznet
Hello and congratulations on your work.
Do you have the script for the "probe window heat" button which is on the OVH?
2 years ago
I’ll check next time I’m on my PC, will get back to you
2 years ago
bLindye
Faize34
Excelente trabajo, gracias.
2 years ago
Pilotillo
marvelous 😊
2 years ago
Corsair777
You're the best, thank you!!
2 years ago
jrodshibuya
Thanks very much for sharing these, I use your FBW A320 Templates and waited for these before buying Fenix. My only problem is APPR does not work?
Is there a way to have all Fuel Pumps come on with a button push, which I have on FBW.
Thanks again
2 years ago
Hmm strange, try to open assignment for APPR and check it’s assigned to correct button.
I’ll add fuel pump scripts to next version.
2 years ago
bLindye
Tezbedz
Thanks for making these 😊
2 years ago
dawatticus