KMRC-Maury-County-Regional
https://www.flymaury.com/
Maury County Airport (IATA: MRC, ICAO: KMRC, FAA LID: MRC) is a county-owned public-use airport in Maury County, Tennessee, United States. It is located 2 nautical miles (3.7 km; 2.3 mi) northeast of the central business district of Mount Pleasant, Tennessee and 8 nautical miles (15 km; 9.2 mi) southwest of Columbia, Tennessee.
This airport is included in the National Plan of Integrated Airport Systems for 2011–2015, which categorized it as a general aviation airport.
Facilities and aircraft
Maury County Airport covers an area of 188 acres (76 ha) at an elevation of 681 feet (208 m) above mean sea level. It has two runways: 6/24 is 6,000 by 100 feet (1,829 x 30 m) with an asphalt pavement and 17/35 is 1,811 by 150 feet (552 x 46 m) with a turf surface.
For the 12-month period ending June 29, 2010, the airport had 28,900 aircraft operations, an average of 79 per day: 78% general aviation, 19% air taxi, and 3% military. At that time there were 23 aircraft based at this airport: 65% single-engine, 26% multi-engine, 4% jet, and 4% helicopter.
===========
Known Issues:
There are 10 Environmental Occluders, 8 open hangars, the terminal and fire department in this scenery. During periods of rain or snow and maybe dense fog you will notice flickering texture. Sometimes this is only seen at certain angles and mainly from the cockpit, but is also seen while using the external and showcase views. The second thing that you may see is holes around the edge of the hangars caused by the occluders. This is normanlly only visible when your aircraft is parked in one of the hangars. I have made the slabs a little larger than the base of the hangars to prevent you from seeing this. If seen, your aircraft will not sink in the holes.
The slab below the hangars is necessary to keep the hangar floor dry and cover up the hole caused by the occluder. The reason some are thicker than the other is becuase of the sloping terrain. The texture used for the slabs are flagged as "Road Material" which will keep the wheels of your aircraft from sinking through to the ground. Think it as going across a bridge.
The SDK documents contains very limited informationon on occluders and very little is found on the web. I devoted many hours trying to resolve this, but I believe there is a bug which will be reported to Asobo becuse of other developers with the same issue.
9 months ago
Captian204
Love these small airports your doing in TN. Any chance you could look at John tune Nashville?
11 months ago
will take a look
11 months ago
danielsjam
usmeagle91
Neat little GA airport, well done.
Just letting you know, there is a ground flicker issue with the terminal building when you get close to it.
12 months ago
I will take a look and tr to fix. Thanks
12 months ago
danielsjam
foxquakes
Footage of my VR flight over your add-on:
https://www.youtube.com/watch?v=D9X7qG04pRM
Good work
12 months ago
Awesome
12 months ago
danielsjam
VR_Aviator
NIce! More open hangars including some open hangars in rows! Also saw the update to KBMG.
12 months ago
The reason you had that large plane at BMG was because of the 19M radius parking spot. It was suppose to be 12M.
12 months ago
danielsjam
fppilot