avatar

Gatwick Airport EGKK Ultra Full Edition: Custom Runways/taxiways/aprons/parking/buildings and Models

当前版本 9.9.8 ILS 由 mkvy
尚未下载

Version 9.9.8 ILS
首发 January 06, 2021
最后更新 May 29, 2021
文件大小 1.51 GB
Downloads 54,977
此文件已被扫描病毒,可以安全下载。
共同体怎么说?

4.93
厉害!
基于 131 评分
😢
12
悲哀
😠
11
愤怒
😮
6
震惊
🙏
87
感激
😂
8
莞尔
😍
150
恋爱
#Handcrafted United Kingdom Drag and Drop



Full Airport reconstruction of runways, Modelling is now more detailed than the old Ultra Version V8.0, i just have the huge task of making the runways/taxiways/aprons/parking bays/painted lines..
The airport is now operational with lots of updates coming
AUTOTUNING ILS OK 
CHECKED AND WORKING WITH WORLD UPDATE 3 UK

Wating for Blender support  for custom Jetways :)

Installing updated versions for EGKK and Best way to clear your cache and get rid of old data indexes
1) Delete the older version 'gatwick' from community folder
2)Start fs2020 and spawn to default Gatwick
3)Close Fs2020 and install New version into community folder as 'gatwick'
4)Open fs2020
This method will solve the problem of scenery not appearing, or overlapping models

ONLY GATES are serviced by Jetways. Even if you are on a Left side stand, and it looks closer  if its a RAMP position the jetway will not move, instead call for steps. This is because Jetways can only serve ONE position in any muti config parking stands. If you look at map planner you can see which are gates and which are Ramp positions. This is how it is in this scenery. In real life of course Jetways can normally service Left positions and middle positions

V9.9.8 ILS

ILS line up corrected by adjusting Mag dev
Apron texture under snow ploughs replaced.
Glidescope and PAPI locations should be at the large touchdown rectangles.
 At the moment in the SDK  editing and repositioning Glidescope locations to the actual real life positions at EGKK does not do anything and autoreset to default EGKK which is way too early. This means PAPI will not align to glidescopes (PAPI will show red, too low) if you use ILS autoland. Maybe sim update 5

V9.9.8 SU4

Ai building blocking Polygons reduced from over 40 to 1
Manor Royal buildings south of runway polygon removed, now that the Ai building system is working better.
No further random buildings will pop up in airfield due to complete coverage of one polygon
Package build with sim update 4
.

V9.9.8

A new Wavy wall, PBR Textured RGB- Only 256 Kb
170 odd numbers Detailing
Snow Ploughs (2 types- basic models at the moment- (glass needs corrections)
Flybywire safe stands everywhere except 170-180 (even stands) / 200's
Farming simulator West of 08R near approach lights in Field (not animated yet, also just a basic model)
Huge mesh reduction on a building in the inner zone, north terminal


常见问题解答

这里很空旷


捐献

这些用户已经捐献给 mkvy 让他继续制作每个人都能享受到的超棒的附加组件。


这里很空旷

  • Version 9.9.8 ILS May 29, 2021

    ILS line up corrected by adjusting Mag dev
    Apron texture under snow ploughs replaced.
    Glidescope and PAPI locations should be at the large touchdown rectangles.
    At the moment in the SDK editing and repositioning Glidescope locations to the actual real life positions at EGKK does not do anything and are set as in default EGKK which is way too short. This means PAPI will not align to glidescopes (PAPI will show red, too low) if you use ILS autoland. Maybe sim update 5

  • Version 9.9.8 SU4 May 27, 2021

    Ai building blocking Polygons reduced from over 40 to 1
    Manor Royal buildings south of runway polygon removed, now that the Ai building system is working better.
    No further random buildings will pop up in airfield due to complete coverage of one polygon
    Package build with sim update 4

  • Version 9.9.8 May 06, 2021

    A new Wavy wall, PBR Textured RGB- Only 256 Kb
    170 odd numbers Detailing
    Snow Ploughs (2 types- basic models at the moment- (glass needs corrections)
    Flybywire safe stands everywhere except 170-180 (even stands) / 200's
    Farming simulator West of 08R near approach lights in Field (not animated yet, also just a basic model)
    Huge mesh reduction on a building in the inner zone, north terminal

  • Version 9.9.7 May 04, 2021

    Pier 5 silver Building Normal bumps removed
    160's Detailing
    Updated ATC Surrounding buildings
    Updated Fire station and surrounding area
    South Terminal 120 panel skylight replaced with one glass texture



Title Subject Last Updated Answers
Latest MSFS update - France etc
Bug
April 14, 2021
image
image
image
image
许可权

上传许可
在任何情况下,你都不允许将此文件上传到其他网站。

修改许可
在任何情况下,你都不允许修改或改进我的文件。

转换许可
在任何情况下,你都不允许转换这个文件。

资产使用许可
在任何情况下,你都不允许使用我的档案资产。

831 评论

Could you do the old Sheffield City Airport EGSY it's still in the sim but comes under YSHE now and can you extend runway so you can land larger aircraft, in fact do what you think they should have done in the first place because it was bound to fail through no foresight from the idiots who designed it, I promise a hefty donation from me if you can do it!

ATC will always guide me to H9L which is a Cargo Hangar... any idea what causes this? I would like to connect to a jetway upon arrival 😀

Do you have a github repo for the airport. I would like it so I can add it to the installer I use.

On the latest version very rough on the performance by the hotel area running an i7 10700k 32gb 2060super.Not a top end machine but I am getting performance at PM Heathrow.

Hi...not sure why but Gatwick CTD each time I try to load. Gatwick loads fine when I use default scenery.

Is there a known conflict?

Just no words... Best addon for Gatwick...

Fantastic job! Everything works for me and everything is so well moddeled and designed. Theres nothing bad I can say about it. Its just amazing that such a good quality is free... I really appreciate your work and your continued development...

Thank you <3

If anyones seeing pink textures anywhere it means that some textures that i am using are missing from your installs. Some maybe apron tarmac/concrete textures from world update airports. So right now its recommended that all world update packages be installed. Some maybe premium Delux airport apron tarmac, its hard to know..

Should I be seeing a bright pink ground texture under the small snow ploughs? Everywhere else at egkk is fine just this one spot. I've removed all cache and uninstalled reloaded and reinstalled but still this are is dayglo pink

Something seems to be seriously wrong with the ILS, on approach to RWY 08R the Localizer was completley off to the right. Haven't checked for RWY 26L though.

Otherwise you're doing an absolutely fantastic job!

Love and appreciate your continued development on this fantastic mod!

I do have one request though - is there anyway where you can upload only the updated files separate from the base package? I believe this can help reduce the size of downloads when we have to update.

If this is possible, that would be amazing!

Thanks again!

Approaching EGKK 25L auto-tuning and glideslope works perfectly. but the horizontal is a little bit off to the right of the runway. even on touch down, I land on the far right side of the runway even one wheel is off the runway. I tried to land two times there now I had the same problem. I put in the mag and wind i don't know if i am doing something wrong or this is known problem

Thank you for this amazing scenerey. This version is working for me. Take-off and landing with Flybywire a32nx experimental version without problems. No CDT's at all. ILS and approach path works very well even with dual AP autolanding and zero visibility. Thanks again.

The fact that you went into all this effort just for the community is mind-blowing. This is amazing scenery, with amazing detail, yet my not so amazing PC can run this scenery 5x better that any other defult Asobo Scenery. Thank you!!

Can you make a KSEA sea-tac airport mod like this? Thanks!

Im getting CTD with SU4 update.

Just did a test flight from Shoreham to Gatwick in a TBM without any issues, no CTD. I cannot replicate any CTD. I cannot test any airliners as they need newer hardware than a 980ti 6GB Vram.

issues i have with my system (parking brake is released)

787 does not even get off the ground, brakes stuck permanently

747- max speed about 30 knots

A320- does not gain altitude, crash lands in fields

Flybywire- Gains speed but needs full runway. Does not follow AP. takes nosedives into ground

Hi there, I love this airport pack you made I am one of the owners of the server Techteen and for me everytime I get close to the airport or spawn at it. It crashes the game to desktop I have the latest version of the pack which is this sernery and have the latest version of the game MSFS so I just need help to fix the crash to desktop on this serney! Also I removed the mod and spawned at Gatwick and no crash so I think this MOD got mest up!

Grand merci et bravo pour cette superbe réalisation, beaucoup de détails et le FPS ne souffre pas ou très peu, à très vite pour un autre site,

Merci

When ever I'm approaching or leaving the airport it turns purple.



© mkvy - All rights reserved. 未经作者事先书面同意,禁止重新上传或转发该文件。
这个飞行模拟器2020修改器是由 mkvy and shared in Scenery Enhancements » Intl. Airports 对于 Microsoft Flight Simulator.

Dedicated Link 改善 报告