Bravo Throttle Quadrant Profile for the Horizon 787
This is a profile for the HORIZON 787 aircraft in Microsoft Flight Simulator 2020 using the Honeycomb Bravo Throttle Quadrant (Hardware).
The profile was generated by David Schlegl at 05.05.2024.
Profile Includes:
• Bravo Axes (fully working thrust levers, speed break, flaps)
• Bravo Buttons (including FCU, AP, Mode Selectors, Gears and ND)
• Bravo Switches (including common features can be changed easily f.e. for a preliminary flow or a full flow)
• Bravo LEDs (including APU, Master Waring, Doors, Parking Break, Anti Ice)
Note before using
• Empty Configuration for Honeycomb Bravo Throttle Quadrant in MSFS Settings
• Some Buttons works only with flight plan (f.e. managed modes) or in specific situations (f.e. APPR Mode)
Bravo Axes
• TRIM--> not working
• SPEED BRAKE --> including armed position, 100% speed break = 100% axis value, no Button used
• ENGINE 1 --> unavailable
• ENGINE 2 --> Eng1 in B787, including TO/GAand Rev Max (buttons)
• ENGINE 3 --> Eng2 in B787, including TO/GAand Rev Max (buttons)
• ENGINE 4 --> unavailable
• FLAP --> via axis Flaps 0 to all Flap settings till Flapsextended
Bravo Button
• GEAR--> up and down including LED
• MODE SELECTOR --> choose Mode for DESC / INCR [CRS = ND zoom]
• HDG --> short press = HDG // long press = change HDG/VS vs TRACK/FPA // LED = HDG Mode
• NAV --> short press = NAV (managedLNAV and VNAV) // long press = LOC ON/OFF // LED = Managed Mode (LNAV & VNAV)
• APR --> short press = APPR mode ON/OFF // long press = n.a. // LED = APPR mode ON
• REV --> short press = ATHR ON/OFF // long press = TO Break ON/OFF when gear down OR AUTOBREAK Modes when gear up // LED = ATHR ON
• ALT --> short press = ALT HOLD // long press = switch between 100ft and 1000ft // LED = Selected ALT
• VS --> short press = n.a. // long press = V/S to 0ft // LED = Vertical speed selected
• IAS --> short press = n.a.// long press = Knots / March switch // LED = Selected speed
• Turning Knob --> DESC or ASC the value selected from Selection Knob (CRS = ND zoom)
• AP--> short press = AP1& 2ON // long press = AP1 and AP2 off
• Flaps Up/Down Toggle --> short press = n.a. // long press = Full Flaps or Flaps 0
Bravo Switches
• Switch 1 - ON --> SIGNs ON // OFF --> SIGNs OFF (seatbelts)
• Switch 2 - ON --> STROBE ON, NAV/LOGO ON 1 // OFF --> STROBE OFF, NAV/LOGO OFF
• Switch 3 - ON --> Beacon ON // OFF --> Beacon OFF
• Switch 4 - ON --> Runway Turnoff ON, NOSE TAXI // OFF --> Runway Turnoff OFF, NOSE OFF (just if switch 5 is OFF)
• Switch 5 - ON --> Runway Turnoff ON, NOSE TO, LANDING ON // OFF --> LANDING RETRACTED, NOSE OFF / TAXI (depends on switch 4), Runway Turnoff OFF / ON (depends on switch 4)
• Switch 6 - ON --> APU Master ON, Delay 3 sec, APU Start, Delay 70 sec, APU Bleed ON // OFF --> APU OFF, APU Bleed OFF (needs some time)
• Switch 7 - ON --> Engine Anti Ice ON // OFF --> Engine Anti Ice OFF
Bravo LEDs:
• GEAR LIGHTS: Green gear down, Red gear moving, OFF gear stored
• MASTER WARNING: Master Warning
• MASTER CAUTION: Master Caution
• ENGINE FIRE: Engine Fire 1 or Engine Fire 2
• LOW HYD PRESSURE: Low Hydraulic
• LOW FUEL PRESSURE: Low Fuel
• ANTI ICE: Engine Anti Ice 1 or 2 or Wing Ant Ice
• PARKING BREAK: Parking Break is set
• STARTER ENGAGED: Engine Mode Selector
• LOW Volts: Electricity low Volt
• APU: APU Master and APU is running
• DOOR: Door indication of an open door